How to update peugeot 3008 sat nav

Can you update Peugeot sat nav?

These systems are updated via a manual update which can be carried out by your local PEUGEOT Retailer. Please contact them for a price. Our experts can order the update pack and complete the update for you on your PEUGEOT.

How do I update my Peugeot 3008 software?

Updating your navigation system’s maps is done using thePEUGEOT Update” application. This application prepares the USB key that you will need to use in your vehicle. If you have previously downloaded the application, open it and start downloading the update.

How do I update my in dash navigation system?

How do I reset my Peugeot 308 sat nav?

How do I reset my Peugeot 308 sat nav? If it’s the SD card system you need to press the setup button then simultaneously press & hold the 1, 2 & 3 buttons until the hidden setup screen shows. Scroll down the list till you find factory reset .

How do I reset my Peugeot touchscreen?

How do I reset my Peugeot 3008?

How do I add AdBlue to my Peugeot 3008?

Locate the AdBlue tank. Unscrew the blue cap turning 1/6 anti-clockwise. Remove the cap upwards carefully and then fill the tank with the contents of the AdBlue cans bought from a service station.

How do you check the TYRE pressure on a Peugeot 3008?

select the Driving Assistance menu. Select Tyre pressures menu. Then select the Reinitialization menu. Press the “OK” button to confirm.

How do you reset the service spanner on a Peugeot 3008?

What are the service intervals for a Peugeot 3008?

Servicing your Peugeot 3008

If you use your car primarily for commuting and getting the family around, we recommend an additional Interim Service every 6 months (or 6,000 miles if that’s sooner).

How much AdBlue does a Peugeot 3008 take?

How big is the AdBlue tank on a Peugeot 3008? In Peugeot vehicles, the AdBlue® is stored in a special 17-litre tank . It contains enough AdBlue® to cover about 20,000 kilometres.

How do you remove the spanner symbol on a Peugeot 3008?

Why is there a spanner on my dashboard Peugeot?

The spanner remains on to indicate that a service must be carried out soon. For 5 seconds after the ignition is switched on, the spanner fl ashes to indicate that the service must be carried out as soon as possible.

How do I reset my Peugeot dashboard?

How do you reset the service light on a Peugeot 2008?

How often should I service my Peugeot 2008?


Badge Engine CC:1.2
NCAP Safety Assist %:70
Service Interval Frequency – Months:12
Service Interval Mileage:16000
Standard manufacturers warranty – Mileage:60000

How do I reset my AdBlue warning?

Fill the tank. Turn the ignition on, don’t start the car. Leave ignition on for 30 seconds or so. Warning should clear.

What does the spanner light mean on a Peugeot 2008?

The “”˜SERVICE’ light does not indicate the car needs a service, the light means there is a fault. It’s french, they come on from time to time if it doesn’t come on again just ignore it. When it’s due a device a spanner appears when you start the car, for a few seconds and when it’s nearly due it stays on permanently.

How to update peugeot 3008 sat nav

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Scroll to top