How To's
How to change your Skype display name, to make it easier for friends or employers to find you
You can easily change your Skype display name by editing your profile, which you can do on your computer or mobile device.
Your Skype display name is how you’ll appear to others who search your name, so it may be helpful to use your first and last name, or another name that you can be easily found with.
Whether it’s for a friend across the country or a potential employer scheduling an interview, you’ll want to make sure users can easily find you on Skype with your display name.
You can change your display name through either Skype’s desktop app, or the mobile app for iPhone and Android . Both require you to access your settings to make the change.
It’s also worth noting that your display name is different than your username . You used to be able to create a custom username, but now, usernames are randomly-assigned codes, making your display name the main way users find you.
Here’s how to change it.
How to change your Skype display name on desktop
1. Open the Skype app on your computer.
2. Click the three dots next to your name in the upper-left corner.
3. Click “Settings.”
4. Under “Manage,” click “Your profile.”
Marissa Perino/Business Insider
5. This will open a new tab in your default web browser. Click “Edit profile” in the upper-right corner of this page.
6. In the box labeled “Name,” enter your new display name, and click “Save” when you’re done. You may also be prompted to add a country or region at this time.
How to change your display name on a mobile device
1. Open the Skype app on your iPhone or Android device.
2. Tap your profile picture at the top of the screen. If you don’t have a profile picture for your account, it’ll be your initials in a gray circle.
3. This will open a pop-up. In the “Manage” section, tap “Skype profile.”
4. Tap the pencil next to your current display name. Enter your new display name, and tap the checkmark when you’re done.
This is the easiest way to access your display name. However, you can also make the change another way:
1. Again, tap your profile picture. In the “Manage” section, tap “Settings.”
2. In your Settings, tap on “Account & Profile.” This will open a new page where you can edit your name.
You can also add an “About me” section, your birthday, your location, and more on this page as well.
How to change your Skype display name, to make it easier for friends or employers to find you.
Do you have to use thinset under backer board?
No Thinset underneath the backer board
“The thinset goes ON TOP of the cement board to stick the tiles!” Cement board is a different product and it needs to be installed in its own way. Additionally, screws don’t take the place of thinset either.
Do you nail or screw cement board?
Fasten the backer board to the floor using proper nails or screws, as recommended by the manufacturer, every 8″ around the perimeter and all supporting the studs. Keep fasteners between 3/8″ and 3/4″ from sheet edges and 2″ in from sheet corners.
Do you have to screw down backer board?
Screw and Joints
Once you have placed all backer board sheets, install screws every six to eight inches although every backer board following the manufacturer’s recommendation. Do not use drywall screws as they are not recommended to be used to hold the backer board in place.
Can you tile straight onto backer board?
Cement backer board is mainly used as a sub-surface for tiling. Cement backer board is often used as a tile base on plywood or OSB subfloor. Cement backer board on concrete as a subfloor or underlayment is usually not recommended or needed. In most cases, you can apply tile directly to the concrete.
Do you need to seal cement board before tiling?
Contrary to popular thought, tile and grout are not waterproof, and some moisture will penetrate even if sealant is used. However, if you choose to use concrete backerboard, which is much stronger and more durable than gypsum board, a water vapor membrane must be placed underneath it or a sealant applied on top of it.
Does cement board need to be primed before tiling?
DO I NEED TO PRIME CEMENT BACKERBOARD BEFORE I TILE ONTO IT? No. HardieBacker® Cement Backerboard is ready to tile once installed, just wipe down with a damp sponge to remove any dust prior to tiling.
Which side of cement board do you tile on?
Cement board has a smooth side and a rough side. Face the rough side out if you will be using thin-set mortar adhesive to install the tile but the smooth side out if you will be using latex mastic.
How do you prepare cement board for tile?
Mix a small batch thin-set mortar as directed by the manufacturer, mixing the dry powder with water in a bucket. Apply a mound of mortar to the subfloor, then spread it out in an even layer, using a 1/4-inch notched trowel. Cover an area just large enough for the first cement board sheet.
Can you use cement board in a shower?
Cement board can be used just as effectively on walls, such as showers and bathtub surrounds, as it is on floors. Doing this will require that you remove the existing surface material before installing backerboard over the studs.
Does cement board need to be waterproofed?
So, if you’re looking for durability and strength, concrete backer–board will probably be your choice. First, you should provide a waterproof/resistant membrane against the wood studs before installing the concrete backer–board to protect the wood studs from moisture absorbed through the backer–board.
Do you need a vapor barrier behind cement board?
Their online instructions/diagrams show no use of a vapor barrier. You should, so that any moisture that gets behind the cement board runs into the tub or shower instead of into your wall cavity (causing rot or mold/mildew).
How do you waterproof cement board before tiling?
Does Hardibacker need to be waterproofed?
Passing ANSI 118.10 for waterproofness, HardieBacker® 500 Waterproof Cement Board protects tile installations and wall cavities from moisture penetration, eliminating the need to spend extra time applying waterproof coating across the entire surface area of your wall project.
Which is better cement board or Hardibacker?
HardieBacker is much more light, and it is also the best selling brand of cement board available. It is much cleaner because it does not have any glass in it. It allows for a smooth job with minimal mess. As a bonus, HardieBacker board has an EZ Grid pattern so you can cut perfect lines.
What is the best backer board for a shower?
Cement board is a good, reliable backer board that works well on both floors and walls. Keep in mind that most tile setters err on the side of caution and brush a waterproofing membrane on top of cement board when it is in wet areas like showers or tub surrounds.
What do you use to seal cement board when tiling?
Do I need vapor barrier behind Hardibacker?
Hardibacker doesn’t need a vapor barrier or waterproofing except you do need to tape and thinset the joints.
How thick should cement board be for shower walls?
The minimum recommended thickness for the shower wall is 1/2″ because like some of the other boards, they become far too flexible at thicknesses below 1/2″. Foam shower tile backer boards are generally about 4x the cost of cement board.
Do you install backer board before shower pan?
It requires no mud job or waterproofing membrane, but it does require direct access to the studs of the shower. This will create a small lip at the bottom of the shower walls where tiles or an acrylic surround would bump out, leaving a gap. Therefore, the pan must be installed first.
Can you use drywall screws for cement board?
You don’t want to use regular drywall screws for cement boards. They can corrode, they can break down the edges of the boards, and they won’t drive in flush properly. Use ITW’s ROCK-ON and BACKER-ON screws instead.
Can you finish cement board like drywall?
This could be wrong, but is the gist of what I learned: Yes, you can mud over cement board and basically treat it like drywall, as long as it’s not going to get wet much. So, doing it above the shower is probably fine.
How do you fill gap between cement board and drywall?
Even if you plan to use mastic instead of mortar to install the tile, you must use mortar to bridge the joint between cement board panels and drywall. Fill the gap between the boards with mortar using the 6-inch taping knife.
Do you have to use thinset under backer board?
No Thinset underneath the backer board
“The thinset goes ON TOP of the cement board to stick the tiles!” Cement board is a different product and it needs to be installed in its own way. Additionally, screws don’t take the place of thinset either.
Do you nail or screw cement board?
Fasten the backer board to the floor using proper nails or screws, as recommended by the manufacturer, every 8″ around the perimeter and all supporting the studs. Keep fasteners between 3/8″ and 3/4″ from sheet edges and 2″ in from sheet corners.
Do you have to screw down backer board?
Screw and Joints
Once you have placed all backer board sheets, install screws every six to eight inches although every backer board following the manufacturer’s recommendation. Do not use drywall screws as they are not recommended to be used to hold the backer board in place.
Can you tile straight onto backer board?
Cement backer board is mainly used as a sub-surface for tiling. Cement backer board is often used as a tile base on plywood or OSB subfloor. Cement backer board on concrete as a subfloor or underlayment is usually not recommended or needed. In most cases, you can apply tile directly to the concrete.
Do you need to seal cement board before tiling?
Contrary to popular thought, tile and grout are not waterproof, and some moisture will penetrate even if sealant is used. However, if you choose to use concrete backerboard, which is much stronger and more durable than gypsum board, a water vapor membrane must be placed underneath it or a sealant applied on top of it.
Does cement board need to be primed before tiling?
DO I NEED TO PRIME CEMENT BACKERBOARD BEFORE I TILE ONTO IT? No. HardieBacker® Cement Backerboard is ready to tile once installed, just wipe down with a damp sponge to remove any dust prior to tiling.
Which side of cement board do you tile on?
Cement board has a smooth side and a rough side. Face the rough side out if you will be using thin-set mortar adhesive to install the tile but the smooth side out if you will be using latex mastic.
How do you prepare cement board for tile?
Mix a small batch thin-set mortar as directed by the manufacturer, mixing the dry powder with water in a bucket. Apply a mound of mortar to the subfloor, then spread it out in an even layer, using a 1/4-inch notched trowel. Cover an area just large enough for the first cement board sheet.
Can you use cement board in a shower?
Cement board can be used just as effectively on walls, such as showers and bathtub surrounds, as it is on floors. Doing this will require that you remove the existing surface material before installing backerboard over the studs.
Does cement board need to be waterproofed?
So, if you’re looking for durability and strength, concrete backer–board will probably be your choice. First, you should provide a waterproof/resistant membrane against the wood studs before installing the concrete backer–board to protect the wood studs from moisture absorbed through the backer–board.
Do you need a vapor barrier behind cement board?
Their online instructions/diagrams show no use of a vapor barrier. You should, so that any moisture that gets behind the cement board runs into the tub or shower instead of into your wall cavity (causing rot or mold/mildew).
How do you waterproof cement board before tiling?
Does Hardibacker need to be waterproofed?
Passing ANSI 118.10 for waterproofness, HardieBacker® 500 Waterproof Cement Board protects tile installations and wall cavities from moisture penetration, eliminating the need to spend extra time applying waterproof coating across the entire surface area of your wall project.
Which is better cement board or Hardibacker?
HardieBacker is much more light, and it is also the best selling brand of cement board available. It is much cleaner because it does not have any glass in it. It allows for a smooth job with minimal mess. As a bonus, HardieBacker board has an EZ Grid pattern so you can cut perfect lines.
What is the best backer board for a shower?
Cement board is a good, reliable backer board that works well on both floors and walls. Keep in mind that most tile setters err on the side of caution and brush a waterproofing membrane on top of cement board when it is in wet areas like showers or tub surrounds.
What do you use to seal cement board when tiling?
Do I need vapor barrier behind Hardibacker?
Hardibacker doesn’t need a vapor barrier or waterproofing except you do need to tape and thinset the joints.
How thick should cement board be for shower walls?
The minimum recommended thickness for the shower wall is 1/2″ because like some of the other boards, they become far too flexible at thicknesses below 1/2″. Foam shower tile backer boards are generally about 4x the cost of cement board.
Do you install backer board before shower pan?
It requires no mud job or waterproofing membrane, but it does require direct access to the studs of the shower. This will create a small lip at the bottom of the shower walls where tiles or an acrylic surround would bump out, leaving a gap. Therefore, the pan must be installed first.
Can you use drywall screws for cement board?
You don’t want to use regular drywall screws for cement boards. They can corrode, they can break down the edges of the boards, and they won’t drive in flush properly. Use ITW’s ROCK-ON and BACKER-ON screws instead.
Can you finish cement board like drywall?
This could be wrong, but is the gist of what I learned: Yes, you can mud over cement board and basically treat it like drywall, as long as it’s not going to get wet much. So, doing it above the shower is probably fine.
How do you fill gap between cement board and drywall?
Even if you plan to use mastic instead of mortar to install the tile, you must use mortar to bridge the joint between cement board panels and drywall. Fill the gap between the boards with mortar using the 6-inch taping knife.
What are the tips to avoid copyright infringement?
5 Tips to Avoid Copyright Infringement Online
- Always assume that the work is copyrighted.
- Do not copy, share or alter without seeking permission.
- Review and retain licensing agreements.
- Have an IP policy for your business.
- Talk to your lawyer.
How do you protect yourself from copyright?
Six steps to protect against copyright infringement claims
- Do not copy anything.
- Avoid non-virgin development.
- Avoid access to prior design work.
- Document right to use.
- Negotiate for enhanced warranty and indemnity clauses.
- Document your own work.
How different do you need to avoid copyright?
According to internet lore, if you change 30% of a copyrighted work, it is no longer infringement and you can use it however you want.
How can social media prevent copyright infringement?
3 Ways to Avoid Copyright Infringement When Posting on Social Media
- Ask for Permission.
- Find Copyright-Free Images.
- Be Mindful When Livestreaming.
- Course Creation And Ebooks.
What is an example of copyright violation?
A typical example of copyright infringement is the use of music in your videos. But it is a copyright violation to download a movie, TV show, music, software or e-book from a website that is not owned by the creator. Usually, these non-authorized sites also automatically prompt you to share the same material to others.
When can I use copyrighted material without permission?
Fair use allows limited use of copyrighted material without permission from the copyright holder for purposes such as criticism, parody, news reporting, research and scholarship, and teaching.
Can you go to jail for copyright?
Can I go to jail for copyright infringement? Yes, violation of copyright laws is considered a criminal offense if the violation is willful and involves a certain amount of commercial profit. Offenders can receive up to 5 years in prison.
How can I legally use copyrighted images?
It’s by no means impossible to use an image that is copyright-protected – you just need to get a license or other permission to use it from the creator first. In most cases, using the work either involves licensing an image through a third-party website, or contacting the creator directly.
How do I get permission to use copyrighted material?
In general, the permissions process involves a simple five-step procedure:
- Determine if permission is needed.
- Identify the owner.
- Identify the rights needed.
- Contact the owner and negotiate whether payment is required.
- Get your permission agreement in writing.
How do you know if a work is copyrighted?
You can search through copyright files by visiting the Copyright Office at www.copyright.gov/records (see Figure 2, below). All copyright information is located in the Public Catalog (click “Search Public Catalog”) which contains information about works registered since January 1978.
What happens if you use a logo without permission?
However, the Publishing Law Center states that, unlike a copyright, a trademarked logo’s ownership can last forever. Logos don’t even need to be registered as trademarks to be protected under current law. This means that using someone else’s logo without permission, even if it’s unregistered, is against the law.
How do you know if a song is copyrighted?
How much of a song can you use without copyright?
Unfortunately, this is not true and there is no bright line rule that says a use is an acceptable use as long as you only use 5, 15, or 30 seconds of a song. Any use of copyrighted material without permission is, according to U.S. copyright law, copyright infringement.
What popular songs are not copyrighted?
Top Six Most Popular Royalty-Free Songs
- Take Me Out to the Ball Game. Singers Jack Norworth and Albert Von Tilzer recorded the original version of Take Me Out to the Ball Game in 1908.
- Happy Birthday.
- House of the Rising Sun.
- Rockin’ Robin.
- Everybody Loves My Baby.
- That’s All Right.
How can I make a song copyright free?
2.Obtain a license or permission from the owner of the copyrighted content
- Determine if a copyrighted work requires permission.
- Identify the original owner of the content.
- Identify the rights needed.
- Contact the owner and negotiate payment.
- Get the permission agreement in writing.
How do I know if music is copyright free?
How to Know if a Song is Copyrighted
- Almost all music is copyrighted.
- To know if a song is copyrighted on YouTube, log in to the YouTube Studio and upload your video in Private or Hidden mode.
- There are many types of licenses out there, from free to royalty–free.
How do I know if a song is copyrighted before uploading?
How long can you play a song without copyright YouTube?
10 seconds or 30 seconds. You still can‘t use it. The only way to legally use music on YouTube is to get permission from the copyright holder (or whoever does actually “own the rights” to the song).
How do you pronounce silicon?
How do you spell Silicon Valley?
Correct spelling for the English word “silicon valley” is [sˈɪlɪkən vˈalɪ], [sˈɪlɪkən vˈalɪ], [s_ˈɪ_l_ɪ_k_ə_n v_ˈa_l_ɪ] (IPA phonetic alphabet).
Is it pronounce or Pronunciate?
The correct verb in English is pronounce, not pronunciate. An articulate and well-educated fluent English speaker who used pronunciate as a verb might be assumed to be making a joke.
Whats the meaning of silicon?
: a tetravalent nonmetallic element that occurs combined as the most abundant element next to oxygen in the earth’s crust and is used especially in ferrosilicon for steelmaking, in other alloys, and in semiconductors — see Chemical Elements Table.
How do you pronounce silicon?
How do you spell Silicon Valley?
Correct spelling for the English word “silicon valley” is [sˈɪlɪkən vˈalɪ], [sˈɪlɪkən vˈalɪ], [s_ˈɪ_l_ɪ_k_ə_n v_ˈa_l_ɪ] (IPA phonetic alphabet).
Is it pronounce or Pronunciate?
The correct verb in English is pronounce, not pronunciate. An articulate and well-educated fluent English speaker who used pronunciate as a verb might be assumed to be making a joke.
Whats the meaning of silicon?
: a tetravalent nonmetallic element that occurs combined as the most abundant element next to oxygen in the earth’s crust and is used especially in ferrosilicon for steelmaking, in other alloys, and in semiconductors — see Chemical Elements Table.
