Protection Status

Home for Latest News and General Updates

How do you reset the security light on a 2001 oldsmobile alero


Jan 29, 2024
Spread the love

How do you bypass a GM security system?

How to Disable a GM PassLock System

  1. Leave the ignition key turned to the “On” position after the vehicle has stalled and will not start.
  2. Look at the dashboard and locate the theft system light. …
  3. Turn the ignition to the “Off” position to disable the PassLock system, and wait for 20 seconds for the system to reset.

How do you reset a 2003 Oldsmobile Alero?

How do you program a key fob for a 2004 Oldsmobile Alero?

Press and hold both the “Lock” and “Unlock” buttons on the keypad that you would like to program. Continue to hold the buttons until the vehicle’s horn sounds two times, which will take approximately 15 seconds. Repeat this step for each additional keypad that you would like to program.

How do I get my car out of anti-theft mode?

Step 1: Insert the key into the door lock. Use the side door on the driver’s side and the physical key even if there is a keyless entry system on the car. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in the position.

How do I turn off anti-theft without key fob?

Ways to stop a car alarm without a keyfob

  1. Check your owner’s manual. Every vehicle is different. …
  2. Lock your doors. …
  3. Turn the car on. …
  4. Turn the ignition to on and wait. …
  5. Pull the fuse for the alarm. …
  6. Pull the wires for your alarm. …
  7. Disconnect the battery.

How do you program a 2002 Oldsmobile key fob?

HOLD the LOCK and UNLOCK buttons on the remote at the same time, up to 30 seconds, until door locks cycle LOCK / UNLOCK to signal successful programming of the remote. REPEAT Step 6 for any additional remotes to be programmed, including working ones.

How do you program a key fob for a 1999 Pontiac Grand Am?

PRESS and HOLD the LOCK and UNLOCK buttons on the first remote to be programmed for 15 seconds. System should now cycle door locks LOCK / UNLOCK and activate trunk release to indicate successful programming of the remote. REPEAT Step 3 for any additional remotes to be programmed, including working ones.

Will disconnecting battery reset anti theft?

It is another way to solve the problem of anti theft system car wont start. Disconnect the positive terminal of the battery for a minute or two. … It will reset the computer system and your car is likely to kick off.

Is there a fuse for anti-theft system?

It is usually located on the dashboard by the driver’s door, in front of your left knee. You may find the alarm fuse in this fuse box. If you do not find an alarm fuse inside of the car, look in the fuse box under the hood on the driver’s side. Your car model may or may not have additional fuse boxes.

How do I reset my immobilizer?

To reset the immobilizer, hold down the panic button.Wait for ten minutes if you push the lock button two times.

Is the anti-theft light supposed to blink?

The Anti-theft Light in the dash of your car should flash periodically to show that the system is engaged and active. You have to lock the doors of the car (without it running) for the alarm to engage.

How do I reset my alarm without the code?

How to reset a house alarm without a code or you’ve lost it?

  1. Go to your alarm system’s main access panel.
  2. Remove the power plug to the alarm console from the socket.
  3. Unlock and open the main panel with the console access key, or a small tool, such as a screw.
  4. Disconnect one of the wires from the system’s main battery.

What does the car with the lock symbol mean?

The lock and car symbol and warning light you are seeing is saying that the anti-theft system has been activated. … If the anti-theft system is stopping the vehicle from wanting to start, it may be contributing to the starting issues. The first thing you should do is try to deactivate the security system.

What causes the security light to come on?

Hello. On your particular vehicle the security light staying on as the vehicle is running is an indication that the security system has failed and is disabled. It is common for a security light to come on after battery dies because the computer may lose its programming to the key.

Does the security indicator light drain battery?

Yes it will drain your battery but should take so long its not a problem.

What triggers the anti-theft system in car?

The Anti-theft alarm system works with the help of sensors installed in and around the vehicle. An impact or the movements inside the car activates the sensors. This, in turn, triggers the Anti-theft alarm system and sounds the alarm. The alarm goes off and alerts the owner/people.

How do I reset my security light?

How do I reset my security indicator light?

Why is my security indicator light flashing?

When the car is locked and off, the Security Indicator Light will blink steadily. It will trigger shortly after the engine has been turned off and the key has been removed from the ignition. For Subaru models with keyless access and a push-button start system, it will do so after the ignition switch returns to “OFF.”

How much does it cost to reset anti-theft system?

Anti-Theft System Reprogramming

Reprogramming can only be done by a dealership technician using a factory scan tool, or by an authorized locksmith if you can find one who can do computer keys. The typical charge for this may be $75 to $150 depending upon how long the procedure takes.

By admin