How do you reset a Whirlpool side by side refrigerator?
Where is the reset button on a Whirlpool refrigerator?
Open the refrigerator’s door and look for the door switches. Press the door switches and the refrigerator temperature button three times within 10 seconds. After releasing the switches, there should be a letter “S” display in the freezer section and an “E” in the refrigerator’s display.
How do I force my Whirlpool ice maker to cycle?
Look at the center of the Whirlpool icemaker to find the rotating arm that pushes the ice cubes out. Grab the plastic teeth on the arm, and gently pull them in a clockwise direction. You will hear a slight winding sound. The icemaker should start into its cycle.
Why is my Whirlpool freezer not making ice?
In other instances, your a Whirlpool ice maker not making ice may be due to insufficient water supply. A clogged water filter, kinked water line hose, or defective water inlet valve can restrict the water flowing to an ice maker. When this happens, ice production will be limited or completely stop.
Is there a reset button on a Whirlpool ice maker?
How do I reset my ice maker?
Turn The Ice Maker Off and On Again
This is a simple matter of resetting the power to your ice maker. By flipping the switch off and back on, you may be able to reset the functionality so that your ice maker begins to dispense ice again.
How do I turn on my Whirlpool side by side ice maker?
Why would my ice maker stop making ice?
Cause: A common cause for a clog is frozen water in the line. … Cause: There is also a possibility that the water filter for the ice maker is clogged. Fix: Locate and replace the water filter. Filters for ice makers are typically located inside the refrigerator (to keep them from freezing).
How do you unfreeze a whirlpool ice maker?
Where is the icemaker switch located?
This type of icemaker is primarily found in Bottom-Freezer and French-Door style refrigerators, though it can be found in other styles as well. To turn ON the icemaker, slide the switch to the left so that the paddle is extended out past the icemaker.
Why is the red light flashing on my Whirlpool ice maker?
Open the freezer door and observe the red status light next to the ice maker’s on/off switch. Result: … The red status light should be steady on. If the light continues to flash, your optics are either blocked in some way or they need to be replaced.
How do I troubleshoot my Whirlpool ice maker?
How do I unclog my ice maker water line?
Flush the Water Lines
Drain the line to the ice maker with clean water and reattach. Grab a bucket and put the water line into the bucket and flush it with straight vinegar. This will eliminate any bacteria that may be hiding in the water line. Flush each of the lines with plain water a few times to clean.
How do i reset my whirlpool side by side ice maker