Connect with us

# How can you obtain a point by folding paper

Published

on

## What is the equation for folding paper?

Using the paper folding formula W=πt×23(n−1)/2 where W is the width (of a square piece of paper), n is the number of folds and t is the thickness, we find that the width of the paper would have to be 0.05π×23(100−1)/2mm wide, to be foldable 100 times.

## What is the purpose of paper folding?

Sequential memory, concentration, ability to follow directions, eye/hand coordination, spatial perception and fine and gross motor skills are some examples. Paper folding can also help develop vital academic objectives. The most obvious applications are mathematics and reading.

## What happens if you fold paper 100 times?

With just over 100 folds, the thickness of the paper would be equal to 93 billion light-years. The reason for this is exponential growth. … When you perfectly fold the paper in half, you will double its thickness. Folding the paper in half a third time will get you about the thickness of a nail.

## Is it true that if you fold a piece of paper 42 times?

Given a paper large enough—and enough energy—you can fold it as many times as you want . Problem: If you fold it 103 times (only if you could ) , the thickness of your paper will be larger than the observable Universe: 93 billion light-years. Yes,on folding the paper 42 times ,it would reach the moon.

## What are the different techniques and methods in paper folding?

Standard Commercial Printing Paper Folding Methods

• None. Half Fold. Tri-Fold. Gate Fold Open.
• Gate Fold Closed. Z-Fold. Accordion Fold. 4-Panel Fold / Parallel Fold.
• Roll Fold. Quarter Fold.
READ ALSO  How to clean off sharpie

## What values we can learn in making origami?

Why is Origami good for you?

• eye hand co-ordination,
• sequencing skills,
• maths reasoning,
• spatial skills,
• memory, but also patience and attention skills.
• Origami allows you to develop fine motor skills and.
• mental concentration.

## What happens if you fold a paper 103 times?

If you fold an A4 sheet of paper 103 times its thickness will roughly be the size of the Universe. … Turns out, according to Dr Karl Kruszelnicki, if you do this 103 times the sheet’s thickness will be larger than the observable Universe: 93 billion light-years.

## Why can’t you fold a paper 8 times?

The commonly accepted wisdom is that you can’t fold a single sheet of paper in half more than seven times. The problem with folding paper in half multiple times is that the paper’s surface area decreases by half with each fold.

## How tall would a paper be if you fold it 50 times?

In fact, if you had a sheet of paper, and folded it in half 50 times, how thick would it be? The answer is about 100 million kilometres, which is about two thirds of the distance between the Sun and the Earth.

## What is an A4 paper?

To many people wordwide, excluding North America and Canada, the most familiar paper size size is A4 (a familiar 210mm x 297mm). It is commonly used for letters and correspondence in the UK and it is the standard paper size for most home printers.

## What is the highest paper fold?

12 times

READ ALSO  How to pronounce mcmahon

The current world paper-folding record belongs to California high school student Britney Gallivan, who in 2002 managed to fold a 1.2km-long piece of tissue paper 12 times.

## Why paper can only be folded 7 times?

It’s commonly accepted that you cannot fold a single sheet of paper in half more than 7 times, no matter what paper finish, size, or basis weight you’re using, for two main reasons: Every time you fold your sheet, you reduce your total surface area by half, so eventually you simply run out of surface area to fold.

## What is a A5?

An A5 piece of paper measures 148 × 210 mm or 5.8 × 8.3 inches. Cutting it in half will create two A6 sheets of paper. An A5 piece of paper will fit into a C5 envelope. … A5 is part of the A series and is defined by the ISO 216 international paper size standard.

## What is B4 paper?

A B4 piece of paper measures 250 × 353 mm or 9.8 × 13.9 inches. Cutting it in half will create two B5 sheets of paper. B4 is part of the B series and is defined by the ISO 216 international paper size standard.

## What is A6 format?

Standard International Paper Sizes and Measurements

## What is A6 size in CM?

105 x 148 mm

To obtain paper sizes in centimetres, convert mm values to cm by dividing by 10 and in feet by dividing inch values by 12.

Table of Paper Sizes From 4A0 to A10.

READ ALSO  What is a ziggurat and what is it used for

## What size is B6?

125 x 176 mm

NOTEBOOK SIZE TABLE

Sep 11, 2020

## How many A4 are in A2?

1 A2 paper size = 4 x A4 paper sheet.

## How do I print A0 on A4?

How to print A0 using A4 pieces

1. Choose File > Print and then click Printer Properties.
2. Select the Basic tab and make sure you have selected single sided landscape colour printing.
3. Select the Layout tab, tick Poster and select 16 pages per poster.
4. Click OK to finish setting up the printer and then click Print.

99 x 210 mm

Envelope sizes

## How big is a 6 paper?

105mm X 148mm

Popular paper sizes and printing formats: A0, A1, A2, A3, A4, A5, A6, A7, A8

## How do I tile a PDF page?

Choose File > Print. From the Page Scaling pop-up menu, select one of the following options: Tile Large Pages Tile only the pages that are larger than the paper. Tile All Pages Tile all the pages in the PDF file.

Click to comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

# Examples of routing protocols

Published

on

By

## What are the most popular routing protocols?

Some of the most common routing protocols include RIP, IGRP, EIGRP, OSPF, IS-IS and BGP. There are two primary routing protocol types although many different routing protocols defined with those two types. Link state and distance vector protocols comprise the primary types.

## Is TCP a routing protocol?

TCP/IP provides two daemons for use in dynamic routing, the routed and gated daemons. In addition, the gated daemon supports the Simple Network Management Protocol (SNMP). The routed daemon only supports Routing Information Protocol.

## Which routing protocol is used today?

While a variety of IGPs are currently used, about the only EGP in use today is the Border Gateway Protocol (BGP). This is the routing protocol of the Internet. From talking with administrators who manage a variety of networks, the consensus is that OSPF is becoming the most popular interior routing protocol today.

## What is routing with example?

Examples of dynamic-routing protocols and algorithms include Routing Information Protocol (RIP), Open Shortest Path First (OSPF) and Enhanced Interior Gateway Routing Protocol (EIGRP).

## What is routing and its types?

Routing is a process which is performed by layer 3 (or network layer) devices in order to deliver the packet by choosing an optimal path from one network to another. There are 3 types of routing: 1. Static routing – Static routing is a process in which we have to manually add routes in routing table.

## How many types of routing are there?

Routing can be classified into three categories: Static Routing. Default Routing.

## What is routing What are the two major kinds of routing?

To forward incoming data packets, a router learns all available routes in the network and stores them in a table known as the routing table. There are two types of routes: static route and dynamic route. A router can learn these routes through two types of routing: static routing and dynamic routing, respectively.

## How are routing protocols classified?

Routing protocols can be classified into different groups according to their characteristics. Specifically, routing protocols can be classified by their: Operation: Distance vector protocol, link-state protocol, or path-vector protocol. Behavior: Classful (legacy) or classless protocol.

## What is classless routing protocol?

Classless routing protocols do send the subnet mask with their updates. Thus, Variable Length Subnet Masks (VLSMs) are allowed when using classless routing protocols. Examples of classful routing protocols include RIPv1 and IGRP. Examples of classless routing protocols include RIPv2, EIGRP, OSPF, and IS-IS.

READ ALSO  How to clean off sharpie

## What is dynamic routing protocols?

Dynamic routing is a networking technique that provides optimal data routing. Dynamic routing protocols allow routers to share information about the network with other routers to allow them to select the best path to reach a destination.

## What is difference between routing and routed protocol?

You must know the difference between a “routedprotocol and a “routing protocol”. A routed protocol is a protocol by which data can be routed. A routing protocol, on the other hand, is only used between routers. Its purpose is to help routers building and maintain routing tables.

## Is BGP a routing protocol?

“Border Gateway Protocol (BGP) is a standardized exterior gateway protocol designed to exchange routing and reachability information between autonomous systems (AS) on the Internet. The protocol is often classified as a path vector protocol but is sometimes also classed as a distance-vector routing protocol.”

## What is difference between static and dynamic routing?

A static routing table is created, maintained, and updated by a network administrator, manually. A static route to every network must be configured on every router for full connectivity. A dynamic routing table is created, maintained, and updated by a routing protocol running on the router.

## Is any difference between routing and routed protocols True False?

Answer: False. Both link state and distance vector protocols are used for interior gateway routing. The term “exterior gateway protocol” is both a generic name for the routing protocols used between autonomous systems and the name of a specific protocol used between ASes.

## What are the main differences between the OSPF and IS IS routing protocols?

What are the main differences between the OSPF and IS-IS routing protocols? OSPF requires an area 0, while IS-IS does not. OSPF is a classful protocol, while IS-IS is a classless protocol. OSPF is a link state protocol, while IS-IS is not.

## Is Igrp still used?

EIGRP has completely replaced IGRP, making IGRP an obsolete routing protocol.

## What protocol does BGP use?

Among routing protocols, BGP is unique in using TCP as its transport protocol. When BGP runs between two peers in the same autonomous system (AS), it is referred to as Internal BGP (i-BGP or Interior Border Gateway Protocol).

## What OSI layer is BGP?

BGP is on top of TCP, so it would be Internet layer 4, OSI layer 7.

## Is BGP UDP or TCP?

Unlike all other routing protocols, BGP uses TCP as its transport protocol. Discuss the consequences of running BGP over UDP.

READ ALSO  How has labor changed over the years

## What are the most popular routing protocols?

Some of the most common routing protocols include RIP, IGRP, EIGRP, OSPF, IS-IS and BGP. There are two primary routing protocol types although many different routing protocols defined with those two types. Link state and distance vector protocols comprise the primary types.

## Is TCP a routing protocol?

TCP/IP provides two daemons for use in dynamic routing, the routed and gated daemons. In addition, the gated daemon supports the Simple Network Management Protocol (SNMP). The routed daemon only supports Routing Information Protocol.

## Which routing protocol is used today?

While a variety of IGPs are currently used, about the only EGP in use today is the Border Gateway Protocol (BGP). This is the routing protocol of the Internet. From talking with administrators who manage a variety of networks, the consensus is that OSPF is becoming the most popular interior routing protocol today.

## What is routing with example?

Examples of dynamic-routing protocols and algorithms include Routing Information Protocol (RIP), Open Shortest Path First (OSPF) and Enhanced Interior Gateway Routing Protocol (EIGRP).

## What is routing and its types?

Routing is a process which is performed by layer 3 (or network layer) devices in order to deliver the packet by choosing an optimal path from one network to another. There are 3 types of routing: 1. Static routing – Static routing is a process in which we have to manually add routes in routing table.

## How many types of routing are there?

Routing can be classified into three categories: Static Routing. Default Routing.

## What is routing What are the two major kinds of routing?

To forward incoming data packets, a router learns all available routes in the network and stores them in a table known as the routing table. There are two types of routes: static route and dynamic route. A router can learn these routes through two types of routing: static routing and dynamic routing, respectively.

## How are routing protocols classified?

Routing protocols can be classified into different groups according to their characteristics. Specifically, routing protocols can be classified by their: Operation: Distance vector protocol, link-state protocol, or path-vector protocol. Behavior: Classful (legacy) or classless protocol.

## What is classless routing protocol?

Classless routing protocols do send the subnet mask with their updates. Thus, Variable Length Subnet Masks (VLSMs) are allowed when using classless routing protocols. Examples of classful routing protocols include RIPv1 and IGRP. Examples of classless routing protocols include RIPv2, EIGRP, OSPF, and IS-IS.

READ ALSO  How to pronounce mcmahon

## What is dynamic routing protocols?

Dynamic routing is a networking technique that provides optimal data routing. Dynamic routing protocols allow routers to share information about the network with other routers to allow them to select the best path to reach a destination.

## What is difference between routing and routed protocol?

You must know the difference between a “routedprotocol and a “routing protocol”. A routed protocol is a protocol by which data can be routed. A routing protocol, on the other hand, is only used between routers. Its purpose is to help routers building and maintain routing tables.

## Is BGP a routing protocol?

“Border Gateway Protocol (BGP) is a standardized exterior gateway protocol designed to exchange routing and reachability information between autonomous systems (AS) on the Internet. The protocol is often classified as a path vector protocol but is sometimes also classed as a distance-vector routing protocol.”

## What is difference between static and dynamic routing?

A static routing table is created, maintained, and updated by a network administrator, manually. A static route to every network must be configured on every router for full connectivity. A dynamic routing table is created, maintained, and updated by a routing protocol running on the router.

## Is any difference between routing and routed protocols True False?

Answer: False. Both link state and distance vector protocols are used for interior gateway routing. The term “exterior gateway protocol” is both a generic name for the routing protocols used between autonomous systems and the name of a specific protocol used between ASes.

## What are the main differences between the OSPF and IS IS routing protocols?

What are the main differences between the OSPF and IS-IS routing protocols? OSPF requires an area 0, while IS-IS does not. OSPF is a classful protocol, while IS-IS is a classless protocol. OSPF is a link state protocol, while IS-IS is not.

## Is Igrp still used?

EIGRP has completely replaced IGRP, making IGRP an obsolete routing protocol.

## What protocol does BGP use?

Among routing protocols, BGP is unique in using TCP as its transport protocol. When BGP runs between two peers in the same autonomous system (AS), it is referred to as Internal BGP (i-BGP or Interior Border Gateway Protocol).

## What OSI layer is BGP?

BGP is on top of TCP, so it would be Internet layer 4, OSI layer 7.

## Is BGP UDP or TCP?

Unlike all other routing protocols, BGP uses TCP as its transport protocol. Discuss the consequences of running BGP over UDP.

# How to get rid of flies outdoors

Published

on

By

## Why do I have so many flies in my yard?

House flies feed on decaying organic material and waste, which includes kitchen garbage, pet waste and even animal food. For this reason, you will often see flies swarming around trash cans, outdoor restrooms and outdoor animal enclosures. Left unchecked, flies can produce two or more generations per month.

## How do you get rid of flies outside naturally?

How to get rid of houseflies naturally

1. Herbs and flowers. Herbs and flowers can be planted both in your garden and outside to keep flies away from your house.
2. Vinegar and dish soap. A mixture of vinegar and dish soap can help you trap flies.
3. Cayenne pepper and water.
4. Venus flytrap.
5. Natural trap bait.

## What is attracting flies to my yard?

Common house flies are attracted to decaying organic filth such as feces and rotting meat, whereas fruit flies seek sugary substances and feed more commonly on overripe fruit, spilled soda, and alcohol.

## What smell will keep flies away?

Lavender, eucalyptus, peppermint and lemongrass essential oils – Not only will spraying these oils around the house create a beautiful aroma, but they will also deter those pesky flies too. Apple cider vinegar – Flies love the smell of apples and vinegar.

## What is the best fly repellent?

• BEST OVERALL: OFF!
• BEST BANG FOR THE BUCK: Mos-Repel Ultrasonic Pest Repellent (2 Pack)
• BEST NATURAL: Buggins Natural Insect Repellent, DEET-Free.
• BEST CANDLE: Cutter 95783 Citronella Candle.
• BEST LOTION: Repel Insect Repellent Sportsmen Max Formula Lotion.
• BEST WIPES: Repel Insect Repellent Mosquito Wipes 30% DEET.

## What is the best natural fly repellent?

Cayenne pepper is an excellent natural fly repellent and also deters many other insects. Mix one cup of water and one teaspoon of cayenne pepper in a misting bottle and spray it near entryways and wherever you see flies. Other natural fly repellents include lemongrass, peppermint, eucalyptus, camphor, and cinnamon.

## Does Pine Sol keep flies away?

Flies seem to HATE pinesol. To make the fly repelling spray, mix the original PineSol with water, at a ratio of 50/50 and put it in a spray bottle. Use to wipe counters or spray on the porch and patio table and furniture to drive the flies away.

## Does spraying vinegar keep flies away?

Homemade fly repellent spray: A mixture of dish soap, water, baking soda, and vinegar can be filled into a spray bottle. The mixture should contain a few drops of dish soap and a tablespoon each of vinegar and baking soda per cup of water. A few sprays of this mixture can be an effective fly repellent.

READ ALSO  Is sucrose strong or weak electrolyte

## What is a good homemade fly spray?

• 4 cups raw apple cider vinegar.
• 20 drops rosemary essential oil.
• 20 drops basil essential oil.
• 20 drops peppermint essential oil.
• 2 tablespoons liquid oil (olive oil, canola oil, or mineral oil will work)
• 1 tablespoon dish soap.

## Can you make your own fly spray?

5 caps of Dettol. 1 teaspoon each of lavender, tea tree, citronella, cedar wood and eucalyptus. Top up to one litre with either water or cold tea. Spray twice a day and keep shaking regularly to keep the oils mixed.

## How do you make homemade fly killer spray?

To make your own homemade fly killer spray take an empty spray bottle and add 5-7 drops of dish soap, then add 2 cups of warm water. Now close the lid of spray bottle, shake the solution and your homemade fly killer spay is ready.

## How do you make natural fly spray?

Oil Blend Homemade Fly Spray Recipe

1. 4 cups apple cider vinegar.
2. 2 tablespoons oil like olive, canola, or mineral oil.
3. 1 tablespoon dish soap.
4. 20 drops rosemary oil.
5. 20 drops basil oil.
6. 20 drops peppermint oil.

## What can I spray outside for flies?

Home remedies to get rid of outdoor flies

Or, use a mixture of vinegar and dish soap as a natural trap. Pour the mixture into a cup, cover it tightly with plastic wrap and poke holes large enough for the flies to enter. You can also mix cayenne pepper with water in a spray bottle to spritz around your outdoor spaces.

## Does white vinegar eliminate flies?

The flies will be unable to escape, and will drown in the vinegar. Put some vinegar in a bowl and mix in a few drops of dish soap. The dish soap will disrupt the surface tension of the vinegar, causing the flies to drown if they try to land on the surface of the liquid.

## What spray kills flies?

Outdoor sprays such as Bifen or Talstar work well to kill and repel flies. Spray all outdoor areas if possible including the sides and even the roof of the structure in some cases. Repeated use may be necessary for good control. Fly Baits such as Maxforce Fly Bait and Golden Malrin work well to attract and kill flies.

## Should you eliminate flies?

Flies can be killed directly by insecticides or physical means such as traps, sticky tapes, fly swats and electrocuting grids. However, they should preferably be controlled by improving environmental sanitation and hygiene.

## Why do I have so many flies in my yard?

House flies feed on decaying organic material and waste, which includes kitchen garbage, pet waste and even animal food. For this reason, you will often see flies swarming around trash cans, outdoor restrooms and outdoor animal enclosures. Left unchecked, flies can produce two or more generations per month.

READ ALSO  What is a ziggurat and what is it used for

## How do you get rid of flies outside naturally?

How to get rid of houseflies naturally

1. Herbs and flowers. Herbs and flowers can be planted both in your garden and outside to keep flies away from your house.
2. Vinegar and dish soap. A mixture of vinegar and dish soap can help you trap flies.
3. Cayenne pepper and water.
4. Venus flytrap.
5. Natural trap bait.

## What is attracting flies to my yard?

Common house flies are attracted to decaying organic filth such as feces and rotting meat, whereas fruit flies seek sugary substances and feed more commonly on overripe fruit, spilled soda, and alcohol.

## What smell will keep flies away?

Lavender, eucalyptus, peppermint and lemongrass essential oils – Not only will spraying these oils around the house create a beautiful aroma, but they will also deter those pesky flies too. Apple cider vinegar – Flies love the smell of apples and vinegar.

## What is the best fly repellent?

• BEST OVERALL: OFF!
• BEST BANG FOR THE BUCK: Mos-Repel Ultrasonic Pest Repellent (2 Pack)
• BEST NATURAL: Buggins Natural Insect Repellent, DEET-Free.
• BEST CANDLE: Cutter 95783 Citronella Candle.
• BEST LOTION: Repel Insect Repellent Sportsmen Max Formula Lotion.
• BEST WIPES: Repel Insect Repellent Mosquito Wipes 30% DEET.

## What is the best natural fly repellent?

Cayenne pepper is an excellent natural fly repellent and also deters many other insects. Mix one cup of water and one teaspoon of cayenne pepper in a misting bottle and spray it near entryways and wherever you see flies. Other natural fly repellents include lemongrass, peppermint, eucalyptus, camphor, and cinnamon.

## Does Pine Sol keep flies away?

Flies seem to HATE pinesol. To make the fly repelling spray, mix the original PineSol with water, at a ratio of 50/50 and put it in a spray bottle. Use to wipe counters or spray on the porch and patio table and furniture to drive the flies away.

## Does spraying vinegar keep flies away?

Homemade fly repellent spray: A mixture of dish soap, water, baking soda, and vinegar can be filled into a spray bottle. The mixture should contain a few drops of dish soap and a tablespoon each of vinegar and baking soda per cup of water. A few sprays of this mixture can be an effective fly repellent.

READ ALSO  Which of the following are the major steps in dna replication

## What is a good homemade fly spray?

• 4 cups raw apple cider vinegar.
• 20 drops rosemary essential oil.
• 20 drops basil essential oil.
• 20 drops peppermint essential oil.
• 2 tablespoons liquid oil (olive oil, canola oil, or mineral oil will work)
• 1 tablespoon dish soap.

## Can you make your own fly spray?

5 caps of Dettol. 1 teaspoon each of lavender, tea tree, citronella, cedar wood and eucalyptus. Top up to one litre with either water or cold tea. Spray twice a day and keep shaking regularly to keep the oils mixed.

## How do you make homemade fly killer spray?

To make your own homemade fly killer spray take an empty spray bottle and add 5-7 drops of dish soap, then add 2 cups of warm water. Now close the lid of spray bottle, shake the solution and your homemade fly killer spay is ready.

## How do you make natural fly spray?

Oil Blend Homemade Fly Spray Recipe

1. 4 cups apple cider vinegar.
2. 2 tablespoons oil like olive, canola, or mineral oil.
3. 1 tablespoon dish soap.
4. 20 drops rosemary oil.
5. 20 drops basil oil.
6. 20 drops peppermint oil.

## What can I spray outside for flies?

Home remedies to get rid of outdoor flies

Or, use a mixture of vinegar and dish soap as a natural trap. Pour the mixture into a cup, cover it tightly with plastic wrap and poke holes large enough for the flies to enter. You can also mix cayenne pepper with water in a spray bottle to spritz around your outdoor spaces.

## Does white vinegar eliminate flies?

The flies will be unable to escape, and will drown in the vinegar. Put some vinegar in a bowl and mix in a few drops of dish soap. The dish soap will disrupt the surface tension of the vinegar, causing the flies to drown if they try to land on the surface of the liquid.

## What spray kills flies?

Outdoor sprays such as Bifen or Talstar work well to kill and repel flies. Spray all outdoor areas if possible including the sides and even the roof of the structure in some cases. Repeated use may be necessary for good control. Fly Baits such as Maxforce Fly Bait and Golden Malrin work well to attract and kill flies.

## Should you eliminate flies?

Flies can be killed directly by insecticides or physical means such as traps, sticky tapes, fly swats and electrocuting grids. However, they should preferably be controlled by improving environmental sanitation and hygiene.

# How to pronounce teach

Published

on

By

## How do you say teacher in British?

teacher

1. educationist.
2. [chiefly British],
3. educator,
4. instructor,
5. pedagogue.
6. (also pedagog),
7. preceptor,
8. schoolteacher.

## How do you say teacher in British?

teacher

1. educationist.
2. [chiefly British],
3. educator,
4. instructor,
5. pedagogue.
6. (also pedagog),
7. preceptor,
8. schoolteacher.

## How do you say teacher in British?

teacher

1. educationist.
2. [chiefly British],
3. educator,
4. instructor,
5. pedagogue.
6. (also pedagog),
7. preceptor,
8. schoolteacher.

## How do you say teacher in British?

teacher

1. educationist.
2. [chiefly British],
3. educator,
4. instructor,
5. pedagogue.
6. (also pedagog),
7. preceptor,
8. schoolteacher.

## How do you say teacher in British?

teacher

1. educationist.
2. [chiefly British],
3. educator,
4. instructor,
5. pedagogue.
6. (also pedagog),
7. preceptor,
8. schoolteacher.

## How do you say teacher in British?

teacher

1. educationist.
2. [chiefly British],
3. educator,
4. instructor,
5. pedagogue.
6. (also pedagog),
7. preceptor,
8. schoolteacher.

## How do you say teacher in British?

teacher

1. educationist.
2. [chiefly British],
3. educator,
4. instructor,
5. pedagogue.
6. (also pedagog),
7. preceptor,
8. schoolteacher.
READ ALSO  How to broil salmon